• Unit is powered and operational
• The unit has been reset to factory defaults
  
• Connect the ethernet cable to the AP and configuring machine
• Assign a static ip to the machine for configuration (Remove once setup has been completed and tested)
• Logon to the AP using the ip on the unit or in the supplied documentation
• Change the default password
  
• Change the default IP
• Disable the AP DHCP Server
• Enter the new SSID
• Enter the security settings for the AP
• Check Channel settings if required
• Check SSID broadcasting if required

1. Remove cable and test the AP within range.
2. Test AP range and connection